Why I Chose An Old Honda NX250 As My World Travel Motorcycle
How my hunt for the perfect travel bike led me to an old Honda from the early 90s.

“What is the perfect adventure bike?” The frenzy of varied recommendations that this question usually sparks, proves the cliche: there is no such thing as the perfect adventure bike. There is only the one that’s right for you.
Some might reply, “it’s the one you have, the one you feel comfortable with.” And there is some truth to that. You’re used to how it handles and know its niggles, maybe even its mechanics. Some have traveled the world on something unusual, like an R1 sports bike, just because that’s what they had and loved. And why not. But what if you are planning to buy a bike specifically for the trip?
My partner and I had decided to travel the world by motorbike before we had ever ridden, let alone owned one. So there we were, scouring the internet, hungrily looking for the answer as to the perfect travel bike.
The GS seemed the obvious choice
We were clear on one thing: we wanted to each ride our own bike, but they were to be the same, so we could share spare parts. Beyond that, it ideally had to be one that never needed fixing, and that was to be small enough for short 5’3” me to handle, without making my partner fold up like a monkey on a grindstone. In the end, we settled on the reputably reliable 2004 model BMW F650 GS, for its combination of decent power with a relatively low seat height.

I had no idea about bikes, but there was a low mileage used one on the Welsh coast that started on the button. So I bought it and rode it back to London. Rookie mistake: as a seaside bike that lived outdoors, it was in bad shape, and everything was rusted shut and rounded off. In short, I must have bought the only unreliable BMW F650 GS in the world.

The wrong bike
This didn’t become apparent until after we commenced our round-the-world trip. The closer we got to crossing from Europe into Asia, the more frequent the breakdowns. To be fair, inexperience made even the basic stuff seem fatal. We had our trusted London mechanic on speed dial and learned a lot about fixing an F650 GS. But it became clear that my bike would not make it through the tougher regions of the Stans, where there would be few BMW parts available. With a heavy heart, we gave up on our plans to ride overland via the silk routes to Australia and returned on our bikes to Germany, where I sold mine and went in search of another.



To be honest, part of me was relieved. Without luggage, I could happily throw the GS around. But with all our gear and only the tip of my tippy toes on the ground, I had been falling all over the place. You’d think I would have gotten good at picking the bike up, but I never mastered it and always had to wait for my partner to come to my rescue. My confidence had plummeted, and I’d started refusing to explore any unpaved roads. Instead of offering freedom, the choice of bike restricted where I would go. Defying all our careful research and the successful test trip from London to Portugal, the GS was not the perfect travel bike for me, after all.

An unusual choice
Armed now with a bit of experience, and with better knowledge of my riding ability and my mechanical prowess, I set out to find my new perfect adventure bike. My choice fell on the unlikely, but simply phenomenal Honda NX250. If anyone knows of this bike at all, it’s often a vague ‘oh, I think that was my mate’s first bike’ memory. First released in 1988, this little dual sport adventure bike was ahead of its time – these were early days for the adventure motorcycling market; and unable to sell this seemingly confused specimen, Honda ended up stopping production after just a few years in Europe and the U.S.. Not a fully specialized off-road bike, and not a street bike either, people weren’t sure what to make of it. But those who took one for a spin, all seemed to agree on one thing: it’s a super fun bike.

And I couldn’t agree more!
I found a 1991 model with about 19,000 miles on the clock that had just passed the very strict bi-annual Gaman safety check, so I could be sure that it was in as excellent condition as it looked. With ample ground clearance, a short wheelbase of 1,350mm (53.2 in.) and a 19-inch front/16-inch rear tire combination, it’s joyously nimble and does anything I ask of it. The dry weight of a mere 123kg (271 pounds) and the low seat at 82cm (32.2 in.) make for easy handling, even fully loaded. At 239cc it isn’t particularly fast, but we like to travel slowly anyway, so that’s a plus, not a draw. And rather unusually for a bike that size and age, it is water-cooled and has 6 gears, making it perfectly capable of sitting on the highway at top speed for hours, without overheating.

No longer able to afford the overland journey, we decided to ship the bikes to Australia, and wow was it a blast braaping around the outback on the NX. Far from shying away from a bit of unpaved road, I was now happily blasting into the trackless desert just because it looked inviting. Not that I was suddenly a better rider or anything. But what a difference the right bike can make!

No bike is perfect
Of course every bike has its drawbacks. A bit like a relationship, it is not about finding flawlessness, but rather about finding a combination of desirables and imperfections that you would love to live with. The usual niggles for an NX250 are a fast-tiring cam chain tensioner, awfully soft suspension, and the fact that the exhaust end-can, which eventually rusts through, cannot be replaced because it forms part of the frame’s structure. The odd-sized tires can be tough to come by, and being out of production for so long, some parts are difficult to get hold of.

Curiously, the little-known NX250 has a devout following – it’s almost like if you know, you know. And that community is always able to source things, from exchanging used parts to 3-D printing new ones. To be honest, I didn’t know all of this when I bought the bike. And by the time I was finding out the hard way, I was having such a good time with the NX that I was willing to live with its quirks. I was totally smitten.
Which bike to ride the length of the Americas?
There was no question then, that this was the bike I was going to ride from Vancouver to Argentina. On exiting Canada, the border guard was sure I’d never make it to South America “on that thing!” Challenge accepted!

Over the two and a half years it took us, there was a fair bit of work to do: the exhaust needed welding, and I replaced the valve seals, the clutch plates, and the cam chain, to breeze over just some of the more major repairs. Most of these are long term consumables and expected when the bike clocks over 100,000 kilometers (currently at 128,000!).

We also had quite a few unplanned breaks due to ‘bike problems.’ But the NX250 did no worse than my partner’s F650 GS. I counted. The BMW had fourteen show-stopping breakdowns, and the Honda only had twelve. (By ‘show-stopping’, I mean being unable to carry on with just a quick zip-tie and duct tape kind of fix.)


We got infinitely better at roadside repairs, and I’ve come to realize that pretty much no vehicle will keep going for years, over hundreds of thousands of kilometers, without the occasional major maintenance. So, when choosing a travel bike, it’s not a question of whether repairs will be needed, but more one of what kind of repairs. And for me, the mechanical simplicity of the NX, incorporating the Japanese philosophy of making everything as user-friendly as possible, makes it a real pleasure to work on.

I am now a much better mechanic for it, if not a better rider. Not that it matters. The unassuming little Honda NX250 has given me the confidence to attempt tricky tracks to nowhere, knowing that I can handle the loaded bike, despite my mediocre-at-best off-roading skills. If I did fall, I often managed to pick it up by myself, before my partner even noticed I’d gone missing. With the NX, I truly have the freedom to go anywhere. Including Ushuaia. Of course the bike made it all the way there, just like I knew it would. It is, after all, the perfect adventure bike.
Photos by Aidan Walsh & Maria Schumacher
Notify me of new posts via email
Hi try out my XR650l 2022…… she is a beast & quits for no one!
Oohhh, that’s a very good looking bike! I’d love to! Much higher seat – I suspect my feet would be dangling mid-air on that one. Looks super fun off-road. Air-cooled five speed – what’s it like sitting on the highway?
Lol I actually started reading this before realizing it was written by a woman. The fact that it was about a 250 should’ve made it obvious I suppose…
Great story Maria. I’m glad that you went with your own criteria and feelings. In a world that has gone mad with having to have the latest high tech motorcycles and gadgets, your story is a testimony to finding your bliss with a so called “outdated” machine. There are a lot of folks out there riding “vintage” machines in places where you wouldn’t expect them. I have an old 1983 Harley that I love to ride. It requires much more maintenance than metric bikes but it keeps me on my toes paying attention to details. There is a guy, I think his name is Doug Wolthe, and he has ridden several vintage Harleys and Indians around the world. He even rode a vintage chopper in the outbacks of Russia and encountered BMW riders who were stranded due to mechanical fails. No matter what you choose, there are challenges but if they are challenges that makes your cork float, then it is worth doing. Cheers! Thanks for the inspiring article.
Thank you for your kind words.
I am yet to meet him in person, but I “know” Doug online. He’s a wizard when it comes to maintaining old bikes. He once diagnosed a myriad of combined moto problems I couldn’t figure out in Guatemala, just by my descriptions over Facebook. He’s never even seen my bike before, but his advice was spot-on and thanks to him I was able to solve it and get back on the road. Top bloke!
I used to follow Doug because I was reading The Horse Backstreet Choppers. I loved his stories and photos. It was fun because a lot of the people who I would read about would be present for chopper shows. Old choppers. Doug rides in the vintage rally from coast to coast. I think he even won it once. That is so cool that you have a connection with him. If anyone knows how to fix a vintage motorcycle in the outback of the Middle East, it’s Doug. There’s a story about him almost getting arrested for taking a picture in a forbidden zone. He had pics of himself with his head wrapped in toilet paper mimicking the dress of some Arabic people. The Middle Easterners saw the pics and thought he was hilarious. They weren’t offended. He has some sort of motorcycle guest house somewhere like Hungary. I forget. Anyway, I’m thrilled for your being able to traverse the globe as you have. I’m 67 now and these type trips just aren’t in the cards anymore.
Keep it between the ditches. Cheers!
Those NX250s seem pretty sweet. Another popular choice is the Yamaha WR250r or the newer Honda crf300l. Glad you had fun and made it work!
Yeah, I hear about the WR250r a lot, but don’t know much about it. The CRF300L is sweet, but its so TALL! Wasn’t that the one Steph Jeavons took around the world?
I really enjoyed reading this article, Maria. I think you picked the perfect bike. Congratulations on reaching your destination.
I did something sort of similar. Not as epic as riding to Argentina, but still a fairly big motorcycle trip. I bought a 2006 Yamaha TTR250. This is not like the new TTR play bikes. The 2006 TTR was basically a clone of the venerable Honda XR250. It is very off road capable with fully adjustable suspension, a 6 speed gearbox just like your NX, and electric start. It also has an amazing forum group in the UK. I chose that bike to ride the Trans America Trail (TAT). I had to make it street legal because all TTRs sold in the US are off road dirt bikes only. No it’s not a powerful bike, but it was perfect for me. I stayed off the highways anyway.
I live in Ohio by lake Erie, and after 8 days of riding on the eastern TAT, I ended up at the Mississippi border. Everything was going great until 2 deer jumped out of the thick woods to my right. This was an old country road, and the tree line was only a couple feet from the roadway. Needless to say I hit the deer at about 35mph. The deer stopped me immediately, and my helmet hit the ground very hard. I was knocked out for an hour before someone found me. I was riding solo. I was laying in the road while I was “sleeping”, so I am very thankful someone didn’t come up the road behind me and run me over. It was on a blind curve to the right so it very easily could have happened. My left wrist was badly broken (along with my right pinky), and I had a concussion. So my trip on the TAT was over before I even got to the interesting part.
That was in 2019 when I was 53. Since then I have ridden on the Kentucky Adventure Trail (KAT) twice, and I ride the Hatfield & McCoy trail system in West Virginia almost every year. I plan to ride several BDRs in the next couple years, and eventually I will ride the western part of the TAT.
Thanks again for an amazing story.
Thank you! That TTR sounds like the right bike for what you are doing. The BDRs have been tempting me and I might give them a go over the next couple of years… Good luck with completing the western TAT!